Search results for “Encoder”

The seeder, combined with the vacuum pump, allows FarmBot to pick up seeds and deposit them precisely in the ground. Note: this product does not in...

This partial kit is available in several variations: Genesis v1.6 (1.5m x 3m bot) 4x Track Extrusions 2x Gantry Columns 1x Gantry Main Beam 1x Z-...

This kit includes the major components needed to upgrade an older FarmBot Genesis or Genesis XL bot to the latest v1.6 hardware. It includes: v1.6...

This PCB mounts directly onto the FarmBot Genesis Raspberry Pi GPIO pin header and provides connectors for the push buttons and LED indicators, as ...

The weeder tool works by pushing small weeds under the soil surface and disrupting their fragile root systems. The tool magnetically attaches to th...

This stainless steel leadscrew allows FarmBot to move in the Z direction. Material: Stainless Steel Diameter: 8mm Th...

The soil sensor works by driving the tool vertically into the soil so that the soil properties can be read by the soil sensor PCB. The tool magneti...

This adapter allows luer lock needles to be mounted to the seeder base and easily interchanged with a 1/4 turn. Threads For Genesis v1.2 - v1.4, t...

This aluminum extrusion allows FarmBot to accurately position the UTM and tools in the z-direction. It slides through the vertically aligned wheel...

These gold-plated pogo pins are attached to the Genesis v1.4+ UTM PCB and make electrical contact with FarmBot's tools. Included in this product is...

The seeder tool allows FarmBot's vacuum pump system to suction hold a single seed onto the interchangeable luer lock needle. The tool magnetically ...

The watering nozzle accepts a concentrated stream of water coming from the FarmBot Genesis UTM and turns it into a gentle shower for your plants. T...

This 24V solenoid valve controls the flow of water from your garden hose to FarmBot's tubing. Compatible with Genesis v1.4+ and Express v1.0+ kits....

Track joining plates are used to join two track extrusions end-to-end and attach them both to supporting infrastructure such as a raised bed. Sold ...

This aluminum extrusion serves as the gantry's primary structural element. The cross-slide's v-wheels move across this extrusion, allowing FarmBot ...

This 24V vacuum pump sucks air through the seeder’s luer lock needle in order to suction-hold a seed on the needle tip during planting. It featu...

Track extrusions are the primary structural component of the tracks sub-assembly. They can be combined end-to-end in order to create longer tracks....

The gantry corner brackets attached the gantry main beam to the gantry columns. They also have mounting holes for the x-axis motors. Note that ther...

This pressure regulator reduces the pressure from a municipal water supply down to 15 PSI (103 kpa, 1.03 bar) so that FarmBot can more easily c...

M3 screws are used throughout FarmBot for mounting motors and other small electronic components on the tools. Diameter: 3mm (M3 size) Lengths: 6mm...

M5 button-head screws of various lengths are used throughout FarmBot to attach plates and 3D printed parts to extrusions, V-wheels to plates, and o...

Use this card to perform an automatic calibration of FarmBot's camera. You may also print your own card using these files: - Front.pdf - Back.pdf N...

These magnets keep tools attached to the UTM. Sold in packs of 3. Material: Neodymium (NdFeB) Coating: Nickle (Ni) Magnetization: Through ...