Tubing

These interchangeable needles are used with the FarmBot Seed Injector to pick up seeds and deposit them in the soil. We have three sizes: 16, 19, a...

These ultra flexible tubes carry water to the UTM and suck vacuum air. Lengths: 0.4m, 3m, 4.5m Material: Silicone or PVC Color: Semi Clear...

These O-rings fit onto the UTM's liquid/gas ports and create a solid seal when tools are mounted. Sold in packs of 3. Material: Buna-N...

This adapter allows luer lock needles to be mounted to the seeder base and easily interchanged with a 1/4 turn.

These grommets fit onto the UTM cover and allow the liquid/gas tubes and the UTM cable to pass into the UTM assembly while keeping water and dust o...

This pressure regulator reduces the pressure from a municipal water supply down to 15 PSI (103 kpa, 1.03 bar) so that FarmBot can more easily c...

This 24V vacuum pump sucks air through the seeder's luer lock needle in order to suction-hold a seed on the needle tip during planting. Compatible...

This 24V solenoid valve controls the flow of water from your garden hose to FarmBot's tubing. Compatible with v1.4 kits. Inlet: 3/4" NPT (Nationa...

This coupler is used to connect the Barbed Adapter to the Solenoid Valve. Material:PVC Threads: 3/4" Female NPT (national pipe th...

This adapter threads into the coupler and is connected to the water tube leading to the UTM. Used in Genesis v1.3 kits. Material: Nylon For T...

These adapters are used throughout the water tubing system. They are sold individually. Material: Brass For Tube ID: 6mm Threads: 3/4" fe...

This plumber's tape is used to seal the pipe thread connections in FarmBot's watering system. Material: PTFE Length: 9m ...

This adapter connects standard US garden hoses to a barbed adapter. Material: Brass Threads: 3/4" Female GHT (Garden Hose Thread) 3/4" Male ...