Fasteners and Hardware

These magnets keep tools attached to the UTM. Sold in packs of 3. Material: Neodymium (NdFeB) Coating: Nickle (Ni) ...

M5 button-head screws of various lengths are used throughout FarmBot to attach plates and 3D printed parts to extrusions, V-wheels to plates, and o...

These stainless steel bars act as long tee nuts allowing M5 screws to securely hold plates, brackets, and other components to a v-slot extrusion.

Combined with screws, these drop-in style tee nuts allow components such as plates and 3D printed parts to be attached quickly and securely anywher...

M3 screws are used throughout FarmBot for mounting motors and other small electronic components on the tools. Diameter: 3mm (M3 size) Lengths: 6mm...

Used to calibrate FarmBot's camera for pixel to coordinate conversion software (used for Weed Detection). Material: Plastic Color: Red ...

When rotated, eccentric spacers accurately position V-wheels on a plate such that they can firmly engage V-slot aluminum extrusions. They are only ...

These spacers are used to offset V-wheels from plates so that they may engage extrusions. Sold in packs of 30. Material: Aluminum ...

These M5 precision shims are placed in between the two bearings in every V-wheel. They keep the bearings from squishing into each other and binding...

M3 locknuts are used throughout FarmBot to secure M3 screws in place. The nylon insert allows the locknut to resist loosening when subjected to vib...

M5 locknuts are used throughout FarmBot to secure M5 screws in place. The nylon insert allows the locknut to resist loosening when subjected to vib...

Standoffs are used to offset the electronics boards from the electronics mounting plate. We offer both 6mm and 16mm length. Both lengths are sold i...

These washers are used throughout FarmBot in combination with M5 screws and M5 locknuts. They allow nuts to be tightened on plastic components and ...

These pins are used to help align track extrusions and the gantry main beams. Sold in packs of 6 (for Genesis sized devices) and packs of 20 (for G...

Zip ties are used to attach wires to the UTM electrical connection screws, to fasten the vacuum pump, and for cable management throughout FarmBot. ...

These screws are used to mount the electronics boards to the electronics mounting plate with the M2.5 standoffs as an intermediary component. Sold ...

These are used to attach the track end plates and track joining plates to supporting infrastructure such as a raised. Sold in packs of 35. Materi...