Products

This plate offsets the seed trough holder to position the troughs inline with the seed injector needle for Genesis kits. Material: 6061 Aluminum ...

The seeder, combined with the vacuum pump, allows FarmBot to pick up seeds and deposit them precisely in the ground. Note: this product does not in...

This aluminum coupling connects the Z-axis stepper motor to the leadscrew to allow FarmBot to move in the Z direction.

This cable connects the solenoid valve to the Farmduino. For Genesis v1.3 kits, a 3m long cable is used. For Genesis and Genesis XL v1.4 kits, a 0....

These spacers are used to offset V-wheels from plates so that they may engage extrusions. Sold in packs of 30. Material: Aluminum Outer Diamet...

Standoffs are used to offset the electronics boards from the electronics mounting plate. We offer both 6mm and 16mm length. Both lengths are sold i...

Combined with screws, these drop-in style tee nuts allow components such as plates and 3D printed parts to be attached quickly and securely anywher...

Track end plates are used to attach the ends of the tracks to supporting infrastructure such as a raised bed. Note: The track end plates are sold i...

Track joining plates are used to join two track extrusions end-to-end and attach them both to supporting infrastructure such as a raised bed. Sold ...

Track extrusions are the primary structural component of the tracks sub-assembly. They can be combined end-to-end in order to create longer tracks....

These ultra flexible tubes carry water to the UTM and suck vacuum air. Lengths: 0.4m, 3m, 4.5m Material: Silicone or PVC Color: Semi Clear...

Connects the Raspberry Pi to the Borescope Camera. Connector 1: Right-angle USB 2.0 Type A Male Connector 2: USB 2.0 Type A Femal...

These polycarbonate V-wheels are precision machined to allow FarmBot to move in the X, Y, and Z directions smoothly and precisely. Each wheel come...

Contains: 4x Track Extrusions 2x Gantry Columns 1x Gantry Main Beam 1x Z-axis Extrusion 1x Leadscrew    

The v1.4 - v1.7 UTM comes completely pre-assembled so you can simply mount it on the z-axis and plug in the UTM cable. It features a custom matte-b...

The v1.7 Farmduino board features an Arduino MEGA 2560 microcontroller that interfaces with the Raspberry Pi and stepper drivers, and controls the ...

This housing protects the vacuum pump from rain. It is mounted on the z-axis extrusion. Material: UV stabilized ABS Color...

These parts are used to guide and support the z-axis cable carrier. The gusset also functions as an area for the z-axis motor's cables to be routed...

This component protects the z-axis motor from rain. The 80mm version for motors with encoders is compatible with Genesis v1.3 through v1.7. Mater...

This aluminum extrusion allows FarmBot to accurately position the UTM and tools in the z-direction. It slides through the vertically aligned wheel...

These components mount on the z-axis extrusion and physically limit how high and low FarmBot can move the z-axis. They are sold individually. Two a...

Zip ties are used to attach wires to the UTM electrical connection screws, to fasten the vacuum pump, and for cable management throughout FarmBot. ...