Products

These screws are used to mount the electronics boards to the electronics mounting plate with the M2.5 standoffs as an intermediary component. Sold ...

M3 locknuts are used throughout FarmBot to secure M3 screws in place. The nylon insert allows the locknut to resist loosening when subjected to vib...

M3 screws are used throughout FarmBot for mounting motors and other small electronic components on the tools. Diameter: 3mm (M3 size) Lengths: 6mm...

M5 locknuts are used throughout FarmBot to secure M5 screws in place. The nylon insert allows the locknut to resist loosening when subjected to vib...

M5 button-head screws of various lengths are used throughout FarmBot to attach plates and 3D printed parts to extrusions, V-wheels to plates, and o...

The microSD card holds FarmBot OS and is inserted into the Raspberry Pi. Exact packaging may vary. Form Factor: MicroSD Capacity:...

This NEMA 17 stepper motor comes with a pre-mounted rotary encoder. They are sold individually, and do not include any cables.

These adapters are used throughout the water tubing system. They are sold individually. Material: Brass For Tube ID: 6mm Threads: 3/4" fe...

These stainless steel bars act as long tee nuts allowing M5 screws to securely hold plates, brackets, and other components to a v-slot extrusion. S...

These O-rings fit onto the UTM's liquid/gas ports and create a solid seal when tools are mounted. Sold in packs of 3. Material: Buna-N...

Garage Sale Item: Partial UTMs. Sold in sets of 3. A little dusty. Note: All Garage Sale items are sold as-is with no warranty and no returns or re...

This PCB mounts directly onto the FarmBot Genesis Raspberry Pi GPIO pin header and provides connectors for the push buttons and LED indicators, as ...

These gold-plated pogo pins are attached to the Genesis v1.4+ UTM PCB and make electrical contact with FarmBot's tools. Included in this product is...

This pressure regulator reduces the pressure from a municipal water supply down to 15 PSI (103 kpa, 1.03 bar) so that FarmBot can more easily c...

This is the "host computer" of FarmBot. You might also call it FarmBot's brain. The Raspberry Pi runs FarmBot OS, communicates with the web applica...

This USB cable provides power to the Raspberry Pi from the Farmduino's built-in 12v to 5v to USB circuitry. Connector 1: Right-angle USB 2.0 Type...

These magnets keep tools attached to the UTM. Sold in packs of 3. Material: Neodymium (NdFeB) Coating: Nickle (Ni) ...

This plate offsets the seed trough holder to position the troughs inline with the seed injector needle for Genesis kits. Material: 6061 Aluminum ...

The seeder, combined with the vacuum pump, allows FarmBot to pick up seeds and deposit them precisely in the ground. Note: this product does not in...

This aluminum coupling connects the Z-axis stepper motor to the leadscrew to allow FarmBot to move in the Z direction.

This cable connects the solenoid valve to the Farmduino. For Genesis v1.3 kits, a 3m long cable is used. For Genesis and Genesis XL v1.4 kits, a 0....

These spacers are used to offset V-wheels from plates so that they may engage extrusions. Sold in packs of 30. Material: Aluminum Outer Diamet...

Standoffs are used to offset the electronics boards from the electronics mounting plate. We offer both 6mm and 16mm length. Both lengths are sold i...

Combined with screws, these drop-in style tee nuts allow components such as plates and 3D printed parts to be attached quickly and securely anywher...

Track end plates are used to attach the ends of the tracks to supporting infrastructure such as a raised bed. Note: The track end plates are sold i...

Track joining plates are used to join two track extrusions end-to-end and attach them both to supporting infrastructure such as a raised bed. Sold ...