Vacuum Pump v1.2 to v1.3 Upgrade Kit
This upgrade kit makes it easy to reposition the vacuum pump to the z-axis, allowing for more powerful suction at the needle. This is for upgrading from FarmBot Genesis v1.2 to v1.3.
Kit includes: 1 vacuum pump mounting plate, 1 vacuum pump cover, 1 vacuum pump cable (compatible with Farmduino or RAMPS), 5 zip ties, 3 M5 x 16mm screws, 2 M5 x 10mm screws, and 5 tee nuts.
Note: If you use the included cable with RAMPS, you will need to cut off the black connector and strip 5mm of the insulation off both wires in order to use the RAMPS peripheral screw terminals.