The v1.6 Farmduino board features an Arduino MEGA 2560 microcontroller that interfaces with the Raspberry Pi and stepper drivers, and controls the UTM and peripherals. The board also features an STM32 co-processor to process the encoder signals at high speed. The board has a layout and connectors that are optimized for FarmBot's various peripherals and motor requirements. It comes with five integrated Trinamic TMC2130 stepper drivers, a replaceable blade fuse, and current-sensing peripheral circuitry.
New with the v1.6 design is an extra motor driver with stall detection circuitry to power the Rotary Tool included with all v1.6 kits. Additionally, the new design implements protected earth grounding for the Vacuum Pump, UTM, and Input Power.
The v1.6 Farmduino board can be a drop-in upgrade for a v1.4 or v1.5 board. Note that you will need to solder or use wire nuts (not included) to connect your old power supply cable to the included power adapter. Vacuum pump cables can be plugged into the peripheral 4 or 5 receptacle.
Because it runs on 24V, this board cannot be used as a drop-in upgrade for v1.2 or v1.3 kits which run on 12V.
There are two versions of the board available with different peripheral connectors. If you are upgrading from a Genesis v1.4 or v1.5 machine, select version 1 so you do not need new peripheral cables.
If you are replacing a defective board, select the version that came with your FarmBot. Inspect the peripheral connectors to verify which version you have.