Genesis v1.3 Parts

Camera

Camera

from $40.00

This IP67 rated borescope camera has a custom 1m focal distance. The USB cable comes in both 5m (Genesis) and 6.5m (Genesis XL) lengths.

M5x10

M5 Screws

from $1.50

M5 button-head screws of various lengths are used throughout FarmBot to attach plates and 3D printed parts to extrusions, V-wheels to plates, and o...

View full details
Luer1

Luer Lock Needles

from $15.00

These interchangeable needles are used with the FarmBot Seed Injector to pick up seeds and deposit them in the soil. We have three sizes: 16, 19, a...

View full details
026c0c2-Luer_Lock_Adapter
Sold out

Luer Lock Adapter

$5.00

This adapter allows luer lock needles to be mounted to the seeder base and easily interchanged with a 1/4 turn.

O-rings

O-rings

$1.00

These O-rings fit onto the UTM's liquid/gas ports and create a solid seal when tools are mounted. Sold in packs of 3. Material: Buna-N...

View full details
Barbs1

v1.2 / v1.3 Barbs

$10.00

These brass barbs screw into the UTM's three liquid/gas ports and accept the three liquid/gas lines coming from the z-axis cable carrier. Sold in p...

View full details
Vacuum Pump 1

12v Vacuum Pump

$20.00

This 12V vacuum pump sucks air through the seeder's luer lock needle in order to suction-hold a seed on the needle tip during planting. Compatible...

View full details
v1.3-Motor-Cables

v1.3 Motor Cables

from $15.00

These 4-wire cables connect each NEMA 17 stepper motor to the Farmduino. They are labelled on the Farmduino end X1, X2, Y, and Z. Sold individually...

View full details
Toolbay1
Sale

Toolbays

from $20.00

These toolbays hold FarmBot's tools, seed bins, and seed trays. We have 3-slot and 1-slot versions available. Thickness: 5mm Material: 5052 ...

View full details
Grommets

Grommets

$2.00

These grommets fit onto the UTM cover and allow the liquid/gas tubes and the UTM cable to pass into the UTM assembly while keeping water and dust o...

View full details
M3x10

M3 Screws

from $1.00

M3 screws are used throughout FarmBot for mounting motors and other small electronic components on the tools. Diameter: 3mm (M3 size) Lengths: 6mm...

View full details
Soil Sensor

Soil Sensor PCB

$6.00

The Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straight...

View full details
Seeder 1

Seeder

$7.00

The seeder, combined with the vacuum pump, allows FarmBot to pick up seeds and deposit them precisely in the ground. Note: this product does not in...

View full details
Z hardstops

Z-Axis Hardstops

$3.00

These components mount on the z-axis extrusion and physically limit how high and low FarmBot can move the z-axis. They are sold individually. Two a...

View full details
Tubing

Tubing

from $5.00

These ultra flexible tubes carry water to the UTM and suck vacuum air. Lengths: 0.4m, 3m, 6m Material: Silicone or PVC Color: Semi Clear o...

View full details
V-wheels

V-Wheels

from $3.00

These polycarbonate V-wheels are precision machined to allow FarmBot to move in the X, Y, and Z directions smoothly and precisely. Each wheel requi...

View full details
GT2 Belt

GT2 Timing Belt

from $20.00

GT2 timing belts are used along FarmBot's tracks and gantry to allow FarmBot to move in the X and Y directions. They mate with the GT2 Pulleys, and...

View full details
Leadscrew

Leadscrew

$35.00

This stainless steel leadscrew allows FarmBot to move in the Z direction. Material: Stainless Steel Diameter: 8mm Th...

View full details
Bearing

Bearings

from $3.00

These stainless steel bearings resist corrosion and have rubber seals to keep debris out. Two of them are used in every V-wheel, and one is used to...

View full details
Soil Sensor

Soil Sensor

$7.00

This tool acts as a mount for the soil sensor circuit board. Material: UV stabilized ABS Color: Gray

3c24f80-Leadscrew_Block_1

Leadscrew Block

$7.00

This delrin block attaches to the cross-slide plate so that the leadscrew can move through it, allowing FarmBot to move in the Z direction. Ma...

View full details
Belt Clips

Belt Clips

$3.00

These clips secure the ends of GT2 Belts to an aluminum extrusion. Belt clips are sold individually. Six are required for a complete FarmBot. ...

View full details